Kota Kinabalu Sabah Malaysia|
Priced for a quick sale. Salicorne, a Ted Brewer 1980 designed Whitby 42 is a spacious, sturdy and rugged full-keeled, heavy displacement center cockpit monohull ideal for those who want more living space on board. She has two double berths each with private toilet and large saloon (which converts to a double berth plus single) and galley with Isotherm compact 2507 water cooled refrigeration unit fitted Aug 2016 (dc) and force 10 cooker and oven.She is one of only a few Whitbys who have been converted from a ketch rig to a cutter rig. (Florida 2005). She had new spreaders and boom replced then. New standing rigging and Harken roller furler were added in 2013. She has a Perkins 4-236 engine (Detroit diesel engine block)All exhaust hoses were replaced in 2017(vetus), a Balmar 150amp alternator, Balmar max charge multi regulator, 6 marine deep cycle house batteries replaced November 2019.1 cranking battery ( Dec 2018) 1 windlass battery. She has a three bladed bronze fixed propeller. Salicorne is fitted with Ocean talk AIS, Garmin echomap50 chart plotter, Furono GPs, Raymarine P70 autopilot and VHF radio. She was completely rewired in 2018 and has LED lighting throughout.She has Air X marine wind power 400w.New blades were fitted 2017 and 4 x100watt solar panels fitted 2018 with smart control box .The owners have lived on board for the last three years so she is well maintained. She comes with lots of extras including a hydrovane partially fitted and never used. She also comes with 2 extra fuel and water containers, a slection of tools and spare parts and a force 10 BBQ. She is berthed in Sutera harbour marina, Kota Kinabalu, Sabah which is a five star marina. Very affordable and it gives access to some of Aisa's finest cruising grounds or she is all ready for a blue water adventure.
|No. of engines:||1|
|Engine model:||Perkins 4-236|
|Drive type:||Shaft drive|
|Length over all:||12.8m|
|Length at waterline:||9.96m|
|Hull material:||Glass Fibre|
|Hull type:||heavy displacement|
|Keel type:||Full Keel|
|Fuel capacity:||500 Litres|
|Water capacity:||880 Litres|
Salicorne is a very spacious Whitby 42 with lots of head room.She was completely rewired in 2018 and fitted with led lighting and 12 volt fans throughout. The shore power wiring was also replaced. She has a very spacious aft cabin reached via the companionway from the navigation station. The saloon is again spacious and con convert into a double and single berth. The galley is fitted with Isotherm compact 2507, water cooled refridgeration unit. Unit and piping all fitted in Aug 2016. A Gimbaled gas stove and oven (force 10) is fitted in the galley with crash bar and locking device. Two gas cylinders are fitted in the designated aft lockers. Gas sniffer was installed in 2018 and all gas piping was replaced.
Air X marine wind power 400w with new blades 2017. 4 x 100 was solar panels fitted in 2018 with smart controller. (plus one older 80wat panel)
New rule automatic bildge pump. whale Gusher 10(manual) plus two additional electric bildge pumps in case of emergency.
Muir cheetah 2500 electric windlass fitted in 2014 plus 90 meters of galvanised chain (new 2014) plus Rocna 25kg anchor (new 2015) lemur 20kg and three more anchors of various sizes.
New Aqua signal navigation ights were fitted November 2017.
Sterling pro power pure sine wave investor 1600w. new Nov 2017
Promariner Pronautic smart battery charger New 2017
Chalomark 2.6 RIB tender and 3.5 Tohatsu outboard engine new in 2018 serviced in Nov 2019
Garmin echomap 50 chart plotter and Raymarine P70 autopilot in cockpit. Icom VHF Dsc, Furono GP32 (new in 2016) fitted in the nav station. oceantalk Mis also fitted.
There is additional sailing instruments in cockpit ( datamarine wind direction and Uniden depth)
McMurdo smartfind G5 Epirb fitted July 2015
Perkins 4-236 Detroit diesel. All exhaust hoses replaced in 2017
Balmar 150amp alternator
Balmar max charge multi regulator
Hydraulic steering system.
6 new deep cycle house batteries (replaced november 2019)
I cranking battery ( replaced dec 2018)
One windlass battery.
Salicorne was converted from a ketch rig to a cutter rig in Florida 2005. A new boom and spreaders were added then. In 2013 the standing rigging was all replaced and a harken furling system added. A Tasker cruising furler was purchased in 2016.
There is also a hank on inner sail and main sail all in good condition.
Jack lines, 2 Horshore buoys and throw-ins. Salicorne also comes with 4 lifejackets and harnesses.(various makes including Burkeand crew saver.)
She also has emergency steering.
Note: Indicated location is approximate general area only.